How to Clean and Replace Your Henry Hoover Filter

You changed the bag. The Henry still sounds strained, still smells a bit stale, and still doesn't pick up like it used to. Before you blame the bag, look at the filter. It is the part most people never touch.

A new bag won't fix a blocked filter. Air has to pass through both the bag and the filter. If either one is choked, the machine performs as if the whole system is dirty, however fresh the bag is.

What the filter actually does

The bag catches the bulk of what you vacuum. The filter sits behind it and protects the motor from the fine dust that gets past the bag, and it helps keep that dust out of the air coming back into the room.

Over time that fine dust packs into the filter material. Airflow drops, the motor has to work harder, and the machine runs warmer than it should. None of this happens suddenly, which is why it is so easy to miss.

The exact filter setup varies between the Henry, Hetty, Harry and James, and between older and newer machines. Your manual will show which filter your model has and where it sits. If you are not sure which machine you own, our Henry, Hetty, Harry and James compatibility guide will sort that out first.

Signs it's the filter, not the bag

  • Suction is weak straight after fitting a brand-new bag.
  • The motor note sounds higher-pitched or strained.
  • The bag is barely a third full, yet the machine performs badly.
  • There is a dusty or stale smell from the exhaust air.
  • The machine gets warm quickly.

If two or more of those apply, the filter is the first thing to check. If suction is poor and the filter looks fine, work through our guide to why your Henry is losing suction for the other likely causes.

How to clean a Henry Hoover filter

  1. Unplug the machine. Always, before opening anything.
  2. Open the machine and find the filter. Follow the manual for your model. Take the bag out first so you can see what you are dealing with.
  3. Tap it out. Knock the filter against the inside of an outdoor bin, then brush off what is left with a soft brush. Do this outside if you can. Fine dust travels.
  4. Wipe out the housing. Dust collects around the filter seat. A damp cloth, then a dry one, clears it.
  5. Wash only if your manual says it is washable. Use cold water and no detergent. Not every filter is designed to be washed, and washing one that isn't can ruin it.
  6. Dry it completely. Leave a washed filter for at least 24 hours somewhere warm and airy. A damp filter refitted into the machine invites smells and mould.
  7. Refit it properly. It should sit flat and fully seated. A filter that is slightly out of place lets dust round the edge.

When to replace it instead of cleaning it

Cleaning only goes so far. Replace the filter when:

  • The material is torn, frayed or stiff.
  • It stays discoloured or heavy after cleaning.
  • The smell comes back within a few days of fitting it.
  • You have reached the replacement interval in your manual.

Treat the filter as a consumable. A household vacuuming once a week will get far more life from one than a cleaner running a Henry across several sites every day, so trade users should check theirs more often than the manual's general guidance suggests.

Make it part of your bag routine

The simplest way to stop a filter clogging unnoticed is to look at it on a schedule. Every second bag change, or once a month, whichever comes first, is enough for most people.

This matters more with a full-size bag. A genuine-size 9 litre bag is a third bigger than the 6 litre bags many compatibles use, so you change it less often, and the filter check can slip with it. The 9L vs 6L guide explains the size difference. Fewer bag changes are a good thing, as long as you don't let the filter go with them.

Related guides

See the packs

Free UK delivery on every order · Same-day dispatch · Backed by 693 verified ★ reviews on Amazon UK — browse them all on our customer reviews page.

Written by the NuClean team. We're an independent UK brand; NuClean bags are a compatible replacement, not manufactured by Numatic. The Numatic and Henry names and part numbers are used for reference only.

Back to blog